skip to Main Content

StormBrixx® SD

StormBrixx® SD is ACO’s standard duty plastic geocellular surface water management system. It consists of a single, recyclable, polypropylene body that can be assembled in a variety of ways to form an open bonded structure.

StormBrixx SD Recommended Installation Depths
StormBrixx SD Features Diagram
1.3 Half bodies per cubic metre
2.Functional design combined with an intelligent snap-lock system make for easy handling and rapid installation
3.High void ratio of 97% of total volume available for storage
4.Height of 1 layer: 36” (914mm)
5.Min. cover depth (see image above):
6.Side panels are used on the outer walls of the structure to enable geotextiles and geomembranes to be installed
7.Recyclable polypropylene material provides a robust and corrosion-resistant basis for a longlasting stormwater management system
8.Small openings at the base of the pillars allow water to fill and drain. This allows the pillars to form part of the storage volume

StormBrixx® SD parts list

StormBrixx® SD tank half body
Overall Length (mm) Overall Width (mm) Overall Depth (mm) Weight (kg) Part No.
stormbrixx sd tank half body 47.44
20.9 314090
StormBrixx® SD (full and half) side panels
StormBrixx® SD (full and half) top cover
StormBrixx® SD layer connectors
StormBrixx® SD access plate
StormBrixx® accessories
Back To Top